The Next Generation of Push Around Material Lifts & Accessories

    Find or Become a Dealer Find or Become a Dealer
    • ToughLift Material Lift lifting boxes with the Load Platform attacment fitted to the Standard Forks.

      Button
    • ToughLift Material Lift lifting a section of pipe with the Pipe Cradle attacment fitted to the Standard Forks.
      Write your caption here
      Button
    • ToughLift Material Lift lifting a hydraulic cylinder with the Boom attacment fitted to the machine.

    • A montage of three images of an ML-20 material lift in the transport configuration, stabilisers and front legs deployed, and with carriage raised.

      The Next Generation of Push Around Material Lifts & Accessories


      Find or Become a Dealer
    • A montage of three images of an ML-20 material lift with pipe cradle, load platform, and boom fitted, all lifting loads.

      We Are Serious About Lifting Materials


      Find or Become a Dealer

    The innovative new range of ToughLift® Material Lifts are designed for lifting materials to enable work to be undertaken at height. The machines can be used indoors and outdoors on solid level ground.

     

    ToughLift® Material Lifts are available in 4 models: ML-10, ML-15, ML-20, and ML-25. The principal difference between the models is their maximum lift heights of 3.49, 4.98, 6.46, and 7.94 metres respectively. All machines are supplied with the Standard Forks load handling attachment, and the ML-20 and ML-25 models are also fitted with stabilisers. With the front legs, and the stabilisers if fitted, in the stowed position all models are just 0.8 metres wide and 2 metres high.

     

    All 4 models include the following features as standard:

    • Anodised lightweight aluminium mast.
    • Hard-wearing aluminium mast pulley wheels.
    • Cable guard with main operational and safety decal.
    • Hoisting and winching anchor.
    • Spirit level mounted on the chassis.
    • E-coated and then powder coated steel fabrications fitted with silicone rubber end caps.
    • Robust waterproof document holder with A5 Instruction Handbook.
    View all features...

    The innovative new range of ToughLift® Material Lifts are designed for lifting materials to enable work to be undertaken at height. The machines can be used indoors and outdoors on solid level ground.

     

    ToughLift® Material Lifts are available in 4 models: ML-10, ML-15, ML-20, and ML-25. The principal difference between the models is their maximum lift heights of 3.49, 4.98, 6.46, and 7.94 metres respectively. All machines are supplied with the Standard Forks load handling attachment, and the ML-20 and ML-25 models are also fitted with stabilisers. With the front legs, and the stabilisers if fitted, in the stowed position all models are just 0.8 metres wide and 2 metres high.

     

    All 4 models include the following features as standard:

    • Anodised lightweight aluminium mast.
    • Hard-wearing aluminium mast pulley wheels.
    • Cable guard with main operational and safety decal.
    • Hoisting and winching anchor.
    • Spirit level mounted on the chassis.
    • E-coated and then powder coated steel fabrications fitted with silicone rubber end caps.
    • Robust waterproof document holder with A5 Instruction Handbook.
    View all features...

    The innovative new range of ToughLift® Material Lifts are designed for lifting materials to enable work to be undertaken at height. The machines can be used indoors and outdoors on solid level ground.

     

    ToughLift® Material Lifts are available in 4 models: ML-10, ML-15, ML-20, and ML-25. The principal difference between the models is their maximum lift heights of 3.49, 4.98, 6.46, and 7.94 metres respectively. All machines are supplied with the Standard Forks load handling attachment, and the ML-20 and ML-25 models are also fitted with stabilisers. With the front legs, and the stabilisers if fitted, in the stowed position all models are just 0.8 metres wide and 2 metres high.

     

    All 4 models include the following features as standard:

    • Anodised lightweight aluminium mast.
    • Hard-wearing aluminium mast pulley wheels.
    • Cable guard with main operational and safety decal.
    • Hoisting and winching anchor.
    • Spirit level mounted on the chassis.
    • E-coated and then powder coated steel fabrications fitted with silicone rubber end caps.
    • Robust waterproof document holder with A5 Instruction Handbook.
    View all features...

    ToughLift® Material Lift models

    ToughLift® Material Lift models

    Share by: